Service Menu

Lube, Oil & Filter Change

• Replace Engine Oil & Filter with MOPAR Quality Parts
• ExpressLane Inspection or Peace-of-Mind Inspection with Written Report

Check 'N Go Service

• Check Engine Oil Level & Condition
• 26-­Point Inspection with Written Report

• Dissolve crankcase acids, varnish, sludge & contaminants which are removed with old oil.

• Replace cabin air filter(s)

• Rotate tires according to manufacturers specification's
• Visual inspection of brakes, rotors & tire wear
• Check & adjust tire pressures

• Remove brake dust, oil & grease from brake components
• Remove caliper from brake assembly, lubricate & re­install slider pins
• Check for proper calliper piston movement
• Deglaze pads to improve braking performance
• Adjust parking brake cables & lubricate (if applicable)
• Clean & lube rear backing plates

• Inspect old plugs for discolouration & carbon deposits
• Replace with new MOPAR quality spark plugs
• Inspect wires & all applicable hardware

• Set vehicle on computerized alignment machine
• Adjust toe & camber to manufacturer's specifications
• Inspect shocks, struts & balance of suspension system for signs of wear
• Road test

• Optimize injector spray pattern by dissolving fuel varnish build­up on the injector tips
• Suspend any moisture present in the fuel tank
• Increase Cetane level & lubricate injectors

• Replace filter with new quality MOPAR filter
• Inspect fuel lines & connections
• Add conditioner to lubricate pump & injector

• Install flushing apparatus
• Administer a cleaning agent directly through the fuel rail to provide maximum cleaning

• Evacuate all contaminated differential fluid & replace with new quality MOPAR fluid

• Pressure test cooling system
• Inspect coolant Ph value & top off fluid level
• Inspect hoses & belts for signs of wear & cracking
• Inspect thermostat for proper operation
• Add coolant conditioner for additional protection against acid formation

• Perform a complete inspection of the cooling system
• Drain old coolant & refill it with new MOPAR quality coolant
• Add a coolant conditioner for additional protection against acid formation

• Use a safe cleaner to dissolve & suspend varnish & harmful deposits that form in vehicle's power steering system
• Flush entire steering system of all old fluid & contaminants & install new high­tech fluid to protect against noise, wear & leakage in the system

• Inspect brake fluid for signs of moisture or contamination
• Flush old fluid &replace with new quality MOPAR approved fluid
• Bleed system of air
• Inspect &adjust calipers
• Inspect braking service &advise
• Inspect brake pedal for proper positioning
• Inspect applicable connectors &ABS components

• Remove & clean throttle body plate channels & sensors
• Use a cleaning agent to clean the throttle throat area & behind the plate
• Verify proper idle & air flow

• Inspect emission & performance items including: spark plugs, P.C.V, wires, & filters
• Computerized analysis of engine performance
• Apply a cleaning agent through the throttle body to remove sticky carbon residues from the throttle valve & plate
• Administer a special carbon blasting solution to soften the harder carbon formations in the combustion chambers & fuel additive to enhance the cleaning process during the final phase

• Remove the transmission pan, clean it & check for any metal deposits located on the magnetic pick­up
• Remove & replace the transmission filter, gasket & fluid with MOPAR quality parts
• Add a seal conditioner for extra protection

• Use state­-of­-the-­art equipment to ensure a complete cleaning & exchange with MOPAR quality fluid
• Includes flush & seal conditioner agent

• Drain & replace transfer case fluid

• Check drains and air conditioning controls
• Check temperature at the vents in the cabin
• Leak test air conditioning system & report

• Check tire tread and condition
• Perform complete air evacuation of all tires and refill with nitrogen
• Tire Guard warranty is available, see your Service Advisor for details